Description
- Always reserve an additional 10%-15% transformer capacity to allow for resistance
- 300W transformer and 600W transformer need to have min. 50% load for LED fixtures
- To dissipate heat properly, transformer must be mounted with breakers facing downward with 12″ surrounding clearance
- According to NEC code #240-3-D, 5A breakers must use 14AWG wire or larger for 5A. Recommend using THHN wire
- The use of low voltage magnetic dimmer is recommended for best dimming performance
- Secondary auto resettable breaker included
- cETL or cUL listed transformers
- (35-100C2) 100W Magnetic Transformer w/ 2 x 5A Breakers (good for both LED & Halogen, Xelogen lamps)
- (35-150C2) 150W Magnetic Transformer w/ 3 x 5A Breakers (good for both LED & Halogen, Xelogen lamps)
- (35-300C2) 300W Magnetic Transformer w/ 5 x 5A Breakers (good for both LED & Halogen, Xelogen lamps)
- Warranty Information: See our Terms and Conditions page for details
- For General Technical Information, see our General Technical Information page for details
Special Notes: * All Prima fixtures and lighting systems must not share circuit with any existing fluorescent fixtures. Use Prima transformer, driver and/or ballast to comply with cUL/cETL listing; or all warranties are void.
Voltage Drop Chart (Class 2 12V Magnetic Transformer).pdf 